PakCat catalogue record

"Development of Red River Waterway" 'Source Title' Mechanics of Alluvial Channels: Proceedings of the third US - Pakistan Binational Symposium on the Mechanics of Alluvial Channels, Lahore, March 3-6, 1985

By Hines, James V.

Bibliographic details

Summary

The Red River flows in an easterly direction from Eastern New Mexico to Arkansas, Where, just north of Texarkana, it flows to the southeast through Arkansas to Shreveport, Louisiana, and continues in that direction, bisecting the state of Louisiana, and diagonally, until it joins the old River, outlet channel and becomes the Atchafalaya River, Which empties into the Gulf of Mexico.In its natural state,the Red River has only limited navigation duriong the spring months each year. The Red River Water Waterway project is intended to provide navigation for 260 miles to Shreveport, Louisiana on a year round basis. The overall plan for the Waterway has been development based in minimum navigation requirments combined witn hydraulic geometry which will allow the channel to develop adequately and remain in condition which will be capable of passing the annual discharges of water and sediment. The design criteria were based on the navigation needs for a standard barge tow, with dimension of 80feet x 600 feet. The authorised channel dimensions are 200 feet width at a depth of 9 feet. Sutudies were made of the natural alignment of river, with results of the studies along with experience gained from similar projects on the Arkansas, Missouri and mississippi rivers, used to establish a critical design section, The construction program consists of five locks and ams, amnd numerous realignments, or cutoffs. The locks and dams will be operataedto maintain adequate depths for naigation during low flow periods,and to provide to essentially natural condition at high flow rates. The alignement is being constructed by excavating pilot channels where necessary along the proposed path, utilizing the natural channel wherever possible. The size of the pilot channel is detetrmined by the hydraulic parameters to be anticipated, the type of materilas present, and the amount of development time available. The Critical Tractive Force method is used to calculate the appropriate initial channel dimensions. Since the banks are formed required to maintain the desire alignment, and to reduce local sediment input from the banks. The bank protection consists primarily of stonefill and trenchfill revetments. Problems which are confronted during construction include available time for development of the pilot channels prior to opening the reach to navigation, disposal of dredged material, and channels and revetment maintenance.