Unconsolidated Sedimentary Aquifers Special Study No.1 Study of Causes of Borehole Deterioration, Pakistan, 1996
Bibliographic details
Summary
Data from the aquifers in the three areas of Pakistan used for this project were shown to be mulitilayered, made up of thin layers each having distinctly different grain size distributions. Moreover, many of these layers are composed of mixed sediments in which the fine grained matrix is able to move through the coarser framwork. It is clear no gravel pack/slot ratio can meet design criteria for successful well design for all layers. The sands of the three areas were different as were the well designs used for each of the areas. Interpretation of the well failures in each area shows: In all three areas the sloz size of the well screen was too small for the gravel pack. This would encourage blocking of the well screen and it could be argued that this was the prime cause for all well failures observed. In the Fordwah Sadiqia area, however, a far higher proportion of wells have failed or begun to fail, which have mixed sediments within the aquifer. It is likely that their presence, as a minimum, speeds up the process of well failure and is probably a mian cause. If these layers are not recognised and the well design adopted to cope with them failure is likely. Resdesign would need larger than usual gravel pack and slot sizes for the mixed layers. In the Khairwala area the gravel pack is universally too large for all sediments and a high percentage of failure is observed. It is also true therefore that if normal Terzahi criteria for well design are not met well yields are likely to fall with time. The recent labaoratory work described by Blackwell, Howsam and Walker (1995) tend to support the above concusions. It is recommended that during well construction very careful sieving analysis is made of each layer and the criteria of Terzaghi and Kovacs as described by Davies, Herbert and Kumar (1994) are applied to determine well design. Further experimental work in the field is needed to enchance these conclusions and determine optimum strategies for well design in multi-layered media.