PakCat catalogue record

Performance Evaluation of Locally Manufactured Drip Irrigation System: Thesis for the Degree of M.Sc. (Honours) in Agricultural Engineering

By Muhammad Younis

Bibliographic details

Summary

The performance of imported, locally manufactured and university made emitters were evaluated in the field laboratory of the Department of irrigation & drainage, University of Agriculture, Faisalabad. The study was conducted to investigate and compare the response of drip irrigation system components i.e. emitters, lateral, filter under different pressures and discharge conditions. The performance of the emitters was evaluated by measuring the discharge at various pressures. The effect of pressure on discharge rate was measured at 63 kpa, 84 kpa, 105 kpa, 126 kpa and 147 kpa pressures. The data was analyzed under the criteria of comparing the coefficient of manufacturing variation, emission uniformity, application uniformity and distribution uniformity. The regression analysis was also made to fit the best line to the observed data and to develop equation for future prediction. Variation of the discharge along lateral was measured in the field by taking the volumetric sample of watr at each emission point over a period of time and wetting zone formation under different discharge rate was studied. The study was conducted in two phases i.e. in the first phase, the discharge, head loss across imported, locally manufactured, university made emitters, filter and lateral wee studied under different pressures in the laboratory. In the second phase, all emitters were installed on lateral of 32 m in length at distance of 4 m each. The wetted zone formation was also studied at different discharges of the emitters while keeping in view the physical properties of the site. The study was mainly conducted to develop the standardization for the locally manufactured drip irrigation system and compare its performance with the imported emitters.