Determination of Water Levels in Observation Wells by Measurement of Transit Time of Ultrasonic Pulses and Calculation of Hydraulic Parameters 'Source Title' Methods and Instrumentation for the Investigation of Groundwater Systems
Bibliographic details
Summary
The drawdown of the groundwater level in a pumping test can be determined by measuring the transite time of ultrasonic pulses in the watr. An ultrasonic transducer is placed several meters below the water table in each obervation well. The transmitted pulse is reflected by the water surface and detected at the transducer. The design of the measuring measurements of the water table level; acquisition of other data such as pumping rate, barametric pressure, temperature, and conductivity of the water; and data acquisition and processing are discussed in detail. The results of a pumping test in a very permeable aquifer of coarse gravel in the upper part of the iller Valley in the Alp foreland (near Ravensburg in Baden Wurttemberg) clearly show that the accuracy of the data obtained by this method is decisive for the evaluation of the test. Because of the complicated geametry of aquifers, it is necessary to obtain the data form wells that are spaced as closely as pssible in order to be able to delineate the hydraulically effictive boundaries. While the influence of the boundaries of a simple, rectangulary cross section can be described analytically by relatively few measurements, the geohydraulic boundaries of the naturally formed cross section of a valley can be determined only in the course of relatively long study.