The Start-up Operation & Maintenance of Filtration Systems for Micro Irrigation 'Source Title' Drip/trickle Irrigation in Action; Proceedings of the third International Drip/trickle Irrigation Congress Volume Vol.1
Bibliographic details
Summary
Screen filters, like media filters, require fine tuning during start-up. System pressure and flow rates should be regulated to conform with the manufacturer's operational limits. Exceeding these guidelines will most likely cause compromised performance or system failure. Exceeding recommended flow rates can cause rapid built up of collected contaminants and excessive flushing or cleaning. Operation at higher than recommended pressure levels may cause damage to both the screen filter housing and filter cartridge. Once the system has been pressurized and all regulating valves have been adjusted, it is advisable to check system for any eaks around lik closure assemblies and line connections. if the screen filter is of the self cleaning variety, the next step is to adjust the amount of water flow for flushing. Inadequate flow during flushing will not clean filter cartridge sufficiently. Frequency and duration of screen filter backwash differs from media filters. Consult the manufacturer for recommended procedures.