A Contribution to the Understanding of Mixed-Flow Centripetal Turbine in Steady Flow 'Source Title' Journal of Engineering and Applied Sciences Edition Vol.16, No.2, July-Dec, 1997
Bibliographic details
Summary
This paper describes the experimental results of a highly loaded mixed-flow turbocharged turbine for automotive application. The results revealed its better design and off-design performance relative to conventional radial-inflow configuration. The advantages offered by the constant blade angle rotor allow better turbocharger-engine matching. The efficiency characteristics of the mixed-flow intel geometry under steady flow have proved to be fairly flat, giving a plateau of high efficiency. The outcome of the blading with forward swept at intel was clearly seen int he shifting of the higher peak efficiencies towards higher expansion ratios or lower velocity ratios, where the engine-exhaust pulse energy is maximum, but without departing from the criterion of radial blade fibres. The entire range swallowing capacity curves of this turbine were observed to be flatter and closely followed a reference radial-inflow turbine "matching line" that showed good turbocharger-engine matching over the operating range of the engine. A comparison with the results obtained from a radial turbine under similar test conditions showed that the swallowing capacity was higher and peak efficiency were achieved at lower velocity ratio in the case of mixed-flow turbine, which represented an improvement relative to corresponding values in a typical radial-inflow counterpart.