PakCat catalogue record

Simulation of a Slot of Permeable Material through the impeding layer at the Boundary Creek Artificial Recharge Site 1992

By Johnston, C.D.

Bibliographic details

Summary

Artificial recharge trials at Boundary Creek south-west Victorial had shown that a layer of finer textured materials beneath the recharge basin impeded infiltration of water from the basin. The impeding layer was at a shallow depth and thin enough to allow relatively easy excavation through the layer. This report presents results from simulations of water infiltration used to aid the design of a slot of coarse and constructed through the impeding layer and estimate the magnitude of the increase in infiltration rate that may be expected. Infiltration from the recharge basin was simulated for a two- dimensional vertical cross section using a finite element model of saturated-unsaturated water flow. The simulations also included the effects of reduced hydraulic conductivity of the bottom and sides of the recharge basin as a result of clogging. A number of scenarios were selected, according to the availbility of equipment and materials, and tested. The best of the tested scenarios gave an infiltration rate slightly more than half that expected to occur without an impeding layer being present. Assuming a limited availability of coarse sand, the major conclusions are that the slot should be made as wide as possible and a thin layer of the coarse sand should also be applied to the bottom and sides of the basin.