Cleaning Drip Irrigation Systems 'Source Title' Drip/trickle Irrigation in Action; Proceedings of the third International Drip/trickle Irrigation Congress Volume Vol.1
Bibliographic details
Summary
Drip irrigation line and emitter plugging continuous to be a serious problem. Unplugging drip systems with strong acids and chlorine exdizecs encouraged the development of specific guidelines for acid and chlorine treatments. Other than sand, silt and clay, the most common causes of plugging are precipitation of calcium carbonate (CaCO3), calcium phosphatic compounds, iron oxide (Fe2O3), and bacterial slimes and algae growths. The usual treatments are acidification for calcium and iron precipitates, and chlorination for bacterial and algae. After deciding what to add to clean out the system, the question, is how much? Table 1 gives suggested amounts of sulfutic of hydrochloric (Muriatic or pool) acid for acidification. Irrigation systems should be inspected annually at the lower ends by opening the lateral lines and any precipitates collected and evaluated emitters or low volume sprinklers should be removed near the lower end of the system, dismantled, and inspected for precipitates, algae, or slime. White precipitates indicate lime, rust colored precipitates indicate iron, and algae or slime usually are black and greasy in appearance. Flushing and pressure checks of lateral lines at least each fall age necessary to determine evidence of clogging.