Application of the Two-Film Model to the Volatilization of Acetone and t-Butyl Alcohol from Water as a Function of Temperature, 1988
Bibliographic details
Summary
The two-film model is often used to describe the volatilization of organic substances from water. This model assumes unofrmly mixed water and air phases separated by thin films of water and air in which mass transfer is by molecular diffusion. Mass-transfer coefficients for the films, commonly called film coefficents, are related through the Henry's law constant and the model equation to overall mass-transfer coefficient for volatilization. The films are modeled as two resistances in series, resulting in additive resistances. The two-film model and the concept of additity of resistances were applied to experimental data for acetone and t-butyl alcohol. Overall mass-transfer coefficients for the volatilization of acetone and t-butyl alcohol from water were measured in the laboratory in a stirred constant-temperatures bath. Measurements were completed for six water temperatures, each at three water mixing conditions. Wind-speed was constant at about 0.1 meter per second for all experiments. Oxygen absorption coefficients were measured simultaneously with the measurement of acetone and t-butyl alcohol mass-transfer coefficients. Gas-film coefficents for acetone, t-butyl alcohol, and water were determined by measuring the volatilization fluxes of pure substances over a range of temperatures. Henry's law constants were estimated from data the literature. The combination of high resistance in gas film for solutes with low values of the Henry's law constants has not been studied previously. Calculation of liquif-dilm coefficients for acetone and t-butyl alcohol from measured overall mass-transfer and gas film coefficnets estimated Henry's law constants, and the two film model equation resulted in physically unrealistic negative liquid film coefficients for most of the experiments at the medium and high water