PakCat catalogue record

"Evaluation of the Functioning of Drainage Systems for more Realistic Drainage 'Source Title' Proceedings of 5th International Drainage Workshop, February 8-15, 1992, Lahore Volume I

By El Bhnasawi, Nadia

Bibliographic details

Summary

For the determination of drain spacings, the transmissivity of the soil is determined during the pre drainage investigations. The resulting data, based on auger hole observations, are at best an approximation of reality. In order to verify the practical validity of these transmissivity values, observations on a previously installed drainage system in a comparable area were carried out. This resulted in the observation that the entrance resistance of the drainage system was excessively high, most likely caused by insufficient filter functioning and less than optimal maintenance and installation quality. Catering for these conditions would result in drain spacing of 0.2-0.5 times the normally assumed spacings. If entrance resistance can be held within the acceptable limits, the transmissivity data observed in the field have to be corrected by a factor 0.3-0.6 in order to be realistic. This results in drain spacings, which are 0.55-0.8 times the values that would be found, if uncorrected field observation data were used. These values are quite acceptable and can be explained by anisotropy normally not taken into account.