"Depth-Integrated Mathematical Modelling on the Distribution of suspended sediment of Alluvial River" 'Source Title' Seminar on Mathematical Modeling of Alluvial Rivers 14-18 April, 1992 Kathmandu, Nepal
Bibliographic details
Summary
The distribution of the suspended sediment is governed by the character of transport processes prevailing in the water course. Two mechanisms are mainly present: suspended matter can be transported from one point in the river to another by the mean motion of the flow (convective transport) as well as by the turbulent motion, and the latter process is also called turbulent diffusion. Both processes must be simulated correctly by a mathematical model. The mean velocity field is usually influenced by the turbulent transport of momentum (diffusion of momentum) which must also be described by the model. The turbulent diffusion of momentum, mass is represented in the statistically averaged equations governing the distribution of the between fluctuating velocities and fluctuating scalars. The task of a turbulence model is to determine these correlation terms so that the mean-flow equations can be closed and solved for the desired distributions of the mean- flow quantities. The mathematical treatment of surface water flow problems depends strongly on the situation considered. Usually rivers and estuaries are relatively shallow, that is they have a large width-to -depth-ratio, in which case the vertical turbulent mixing is much stronger than the horizontal one. In many cases the vertical non-uniformities of matter concentration are quickly evened out so that the concentration is approximately constant over the depth. Under these circumstances, which are found mostly in fast flowing rivers, only the horizontal distribution of matter concentration has to be determined by a mathematical model so that a two-dimensional depth-integrated model can be used. Such calculations require a depth-integrated turbulence model and as will be discussed later, such turbulence models can be rather integrated turbulence models are, however, necessary for the near-field of discharges or near-bank region especially when the channel has irregular geometry causing flow separation. In section 2, Basic equations governing transport processes are introduced and discussed, and In section 3, research result and concluding remarks are given.