PakCat catalogue record

Industrial Production of Copper Powder 'Source Title' Journal of Engineering and Applied Sciences Volume Vol.5, No.1

By Hirani, R.S

Bibliographic details

Summary

When current is allowed to pass through the electrolytic cell, positively charged ions are released from anode due to electro chemical reaction and deposited in the cathode in the power or spongy form. Copper powder production plant was designed and developed. A series of experiments have been made to study the effects of different parameters like, current density, process duration, potential difference and electrolytic concentration on the powder characteristics.The results are analysed and concluded as under:- The quantity of powder produ ed increased with the rise in applied current.The production rate was maximum at the current desity of 10.44 amps/dm2 and finer powder was produced at the higher current density. The amount of powder produced was directly proporational to the process time, with the maximum at three hours.Where as the grain size of the powder was inversely proporational to the process time. The production rate/hour decreased by increasing thge applied voltage, however finer powder was produced at higher voltages. The Maximum production rate having coarse grain size was achieved with the electrolytic concentration of 175 gms.of H2SO4 per litre of distilled water.