PakCat catalogue record

"Quality Checking of Subsurface Drains Using Rodding Techniques" 'Source Title' Proceedings of 5th International Drainage Workshop, February 8-15, 1992, Lahore Volume III

By Dayem, S.A

Bibliographic details

Summary

The performance of a subsurface drainage system over the project life time depends to a great extent on the quality of installation. Deviations from the straight grade line may create resistance to flow due to air lacks in the higher parts and silt deposits in the lower parts. Breaking, squeezing and crushing of drain pipes and tubes during installation may not be realized immediately. therefore, ways and procedures to inspect and check the quality of constructing is vitally important to ensure proper drain performance. Means for checking the presence of defects immediately after the drains have been installed are still few and not common. However, some promising developments have taken place during the last few years. Among these is the rodding system developed in the Netherlands for checking singular drain systems. This paper describes the testing of rodding in composite drainage systems in arid regions. The method is evaluated and compared with working with singular systems both under wet and dry conditions. The results obtained indicate that rodding can be used effectively to check the quality of construction of lateral drains of composite systems. It can be applied immediately after constructing the drains in order to replace or repair the faulty ones during the installation stage.