PakCat catalogue record

Trickle Irrigation Management for Grape Production 'Source Title' Drip/trickle Irrigation in Action; Proceedings of the third International Drip/trickle Irrigation Congress Volume Vol.1

By Bucks, D.A

Bibliographic details

Summary

A four year investigation was conducted near Phonexi, Arizona, on a sandy loam soil using trickle and furrow irrigation on a mature, table grape vineyard. Trickle treatments consisted of three irrigation quantities, two or three irrigation frequencies, and either one or two emitters (each 3.8 L/hr) per vine. Furrow treatments were the same three seasonal quantities applied in two or three furrows per vine row. Irrigation quantities were based on ratio of estimated evapotranspiration rates for high production trickle emitters per vine over furrow irrigation, whereas yields did not differ between one trickle emitter per vine and furrow irrigation. The highest production was obtained where the trickle applications were near to above the seasonal evapotranspiration for furrow irrigation, which ranged from 310 to 485 mm between bud break and harvest for Perlette grapes. The evapotranspiration estimates were within 30 mm of measured values using the penman, van Bavel, or Jensen Haise reference evapotranspiration equations multiplied by a crop coefficient. A trend of increased yields for three or six day frequencies over daily trickle occurred in three out of four years. The relative maximum yield (Yg) in terms of seasonal evapotranspiration (SET) and trickle irrigation frequency (F) was expressed as YR=0.09 +1.65 (SET) -0.70 (SET)2 +0.05 (F) - 0.006 (F)2, where the maximum yield occurred at about 1.05 to 1.25 SET and a three to four day frequency.