Hydraulic Characteristics of Selected Lined Water Cources 'Source Title' Journal of Engineering and Applied Sciences Volume Vol.4, No.2
Bibliographic details
Summary
Design discharge of an irrigation canal is based on the area to be irrigated, crops to be grown, delivery system in practice, however, are not properly designed they tend to silt up the bed or if the velocity of flow is high they may scour. Even if all the design criteria are mitt carefully, one may fail to get the anticipated flows due to improper maintenance and repair. Consequently it is necessary to review the design of operational canal, check its cross section, slop, sediment deposit, erosion and discharge at various section so as to maintain it properly. Keeping in view the above objectives, the study was made on three selected concrete lined water courses during November 1984 to know any change in hydraulic characteristics associated with sediment transport and silt deposit. The observations of silt deposition were studied at 30 meters and 150 meters below the head of each water course in its lined section. Thicker layer of silt deposit was observed at 30 meter reach than that of at 150 meters. Average velocity at each section was also measured with float method and it was to change in bed slope and normal depth. It was concluded that these water courses require a periodical maintenance and silt removal from their beds otherwise their conveyance capacity may be affected adversely.