The Effect Of Irrigation Water Deficit and River Discharge Variation on Selection of dam reservoir Capacity 'Source Title' Proceedings of Regional Conference on Water Resources Management, Isfahan, Iran, 1995
Bibliographic details
Summary
A dam reservoir capacity for irrigation purpose is usually selected through analysis of monthly river discharge, irrigation requirements, other input/output to the reservior, and dam site charactersitics. It is common to cosider part of the reservoir volume as a carry-over capacity on a floody river. But, the required capacity for carry-over increases rapidly as the range of variations in annual discharge increases. Therefore, there is an economical Emit to carry-over capacity which is governed by reducing irrigation application during dry season. In order to obtain an optimum reservoir capacity in any dam and irrigation project, a careful assessment of cost and benefit associated with each planned irrigation water deficit scenario must be conducted. A computer model was established to search for optimal solution under such conditions. A systematic allocation of irrigation water deficit was adopted to the model. This type of irrigation application imposes water stress on crops with variations in its magnitude and timing. The water production function developed by Nairizi-Rydzewski (1977) was used to estimate the crop yield under water stress. The model was applied to feasibility studies of some dam projects, located in Khorasan Province. The results of this study showed that the optimum volume for Darongar reservoir is obtained under 60% reduction in irrigation requirement, during the dry years, whereas Shirin-Dareh reservoir is optimized at 30% reduction in irrigation water allocation. This difference is due to the variation in river discharge. Therefore, there is no unique level of irrigation water deficit in optimizing the dam reservior capacity, and in each case study a thorough benefit-cost analysis is required.