Irrigation Scheduling for Wheat and Cotton under Rotational Delivery System 'Source Title' Journal of Drainage and Reclamation Volume Vol.2, No.1
Bibliographic details
Summary
Research on judicous use of irrigation water for wheat and cotton crops has been conducted at Drainage and Reclmation Institute of Pakistan (DRIP) between 1986 and 1989. Consumptive use (CU) for each crop was determined under no stress conditions in the drainage lysimeters of DRIP. In the field, irrigation requirement was also independently determined at 40% 60% and 80% soil moisture depletion (SMD) rates. Potential evapotranspiration (ETP) was determined via Penman method using the hourly data collected from the weather station of DRIP; subsequently crop coefficients for both crops were determined. These irrigation experiments were continued for one more year in the field for application rates of 0.75 CU, 1.00 CU and 1.25 CU respectively. Finally irrigation schedules were developed under the constrained rotational irrigation delivery system. Research revealed that for medium textured soil all SMD treatments had insignificant effect on difference of yields. Similar nonsignificant effect was also observed for irrigation application rates however, water use efficiency at 0.75 CU was much higher than other two treatments. Thus, irrigation schedule of cotton is recommended as 100 mm at the time of soaking and then 75 mm each at the interval of 4,7,10,13,15 and 18 weeks respectively with a total of 550 mm. For wheat, irrigation depth of 75 mm is recommended at the time of soaking and then after 3,6,11 and 15 weeks respectivley with a total of 375 mm.